Results 1 - 34 of 34
Dockmate Heavy-Duty Marina-Grade Dock Bumpers
EPE multi-layered cell foam
Heat-sealed construction
Waterproof, mildew-resistant, UV-resistant
Heavy-duty reinforced fabric
36"L x 8"H x 6"D
Dockmate Wide Step Flip-Up Dock Ladders
Extra strong aluminum alloy with anozided finish
Flip-up ladder stows above the dock
Corrosion-resistant
750-lb. capacity
20" wide ladder, 4" wide steps
Dockmate Stationary Dock Ladder, Wide Step
Extra strong aluminum alloy with anozided finish
Straight, stationary ladder
Corrosion-resistant
750-lb. capacity
20" wide ladder, 4" wide steps
Dockmate Wide Step Dock Lift Ladders
Extra strong aluminum alloy with anozided finish
Retractable ladder stows above the water line
Corrosion-resistant
750-lb. capacity
20" wide ladder, 4" wide steps
Dockmate Stationary Dock Ladders, Standard Step
Extra strong aluminum alloy with anozided finish
Straight, stationary ladder
Corrosion-resistant
750-lb. capacity
20"W
Dockmate Standard Step Dock Lift Ladders
Extra strong aluminum alloy with anozided finish
Retractable ladder stows above the water line
Corrosion-resistant
750-lb. capacity
20"W
Dockmate Inflatable Dock Wheels
Smooth-rolling wheel
Molded-in valves
Heavy-duty, hot-dipped galvanized hardware
Galvanized Lag Bolt Mounting Hardware Kit
Four galvanized 3" x 1/2" lag bolts
Four 1/2" flat washers
Stainless Steel Lag Bolt Mounting Hardware Kit
Four 3" x 1/2" lag bolts
Four 1/2" flat washers
Dockmate Collegiate Dock Shield Fenders
High-gloss finish
Easy inflation with sports ball needle
Molded-in eyelets
5-1/2" x 20"
Mooring Snubber, fits 3/8" - 7/16" line
Unharmed by saltwater, ozone, UV-rays
13" long
Fits 3/8" - 7/16" line
Dockmate Tuff Shield II Fender Package
Four 6-1/2" x 22" Tuff Shield II Fenders
Double-molded white ends
Inflatable
Mesh gear bag
Four Dockmate 5 Fender Lines
Dockmate Mooring Buoys, 15" dia.
Rotational molded hard plastic
Galvanized eye bolts run through buoys center
Recessed design protects your boat from hardware
15" diameter
50-lb. buoyancy
Dockmate Conehead Piling Caps
Discourages sea gulls from landing
UV-resistant polypropylene
3-1/2" x 3-1/2"
Taylor Made Tuff End Inflatable Vinyl Buoy,
Ideal for larger boats and rafting
Heavy-duty seamless construction
Ends made from injection-molded vinyl
2000 psi tensile strength
Curved design hole prevents chafing
Dockmate Twisted Dock Line
Absorbs sudden shock better than other lines
Three-strand twisted nylon
Resistant to abrasion, rot, mildew, and more
1/2" x 15
Tensile strength: 5,500 lbs.
Dockmate Tuff Shield II Inflatable Vinyl Fender
Heavy-duty, marine-grade vinyl
High-gloss finish
Double-molded white ends
Easy-to-use rubber inflation valve
5.5" x 20"
Braided Nylon Anchor Line
High shock absorption
Resistance to petroleum products
Spliced-in thimble in one end
Tensile strength: 4,400 lbs.
3/8" x 150
Twisted Nylon Anchor Line
Will not rot or mildew when stowed wet
Spliced-in thimble on one end
Tensile strength: 3,300 lbs.
3/8" x 100
Dockmate Conehead Piling Caps For Round Pilings
Discourages sea gulls from landing
UV-resistant polypropylene
10" diameter
Dockmate Corner Inflatable Dock Wheel
Smooth-rolling wheel
Molded-in valves
Heavy-duty, hot-dipped galvanized hardware
Dockmate Float Drums
10"H x 20" x 6
450 lbs. buoyancy
Rotationally molded seamless outer shell
Reflective Flash Dot is easily seen at night
15-year warranty
Dockmate Dock Shield Fenders
Guaranteed against bursting and splitting
Designed with a high gloss finish
3.5" x 13"
Poly Anchor Line
210-lb. work load
Tensile strength: 1,050 lbs.
1/4" x 100
Dockmate Premium Double Braid Nylon Dock Line
Shock absorbing elasticity
Resistant to rot, abrasion, mildew, and chemicals
Hand spliced eye is stronger than a knot
Dockmate Deluxe Mooring Whips
Gray fiberglass poles
Roller tip and tie-up cleat on whip
One-piece whip
Aluminum tensioner
Aluminum base with cleat and ring
Dockmate Replacement Rocker Base for Mooring Whips
For Dockmate "Deluxe" or "Ultimate" mooring whips
Replacement Rocker Base
Dockmate Ultimate Mooring Whips
Gray Fiberglass Poles
Roller Tip and Tie-Up Cleat on Whip
Plug and Socket Poles
Aluminum Tensioner
Rocker Base with Shock Absorber
Dockmate Commercial-Grade Double-Molded Dock Profiles
Heavier wall section to protect larger boats
Great for dock builders and marinas
Molded and bonded marine-grade resin
Comes in 20 roll
3-1/2"H x 1-3/8"D
Dockmate Dock Bumper Profiles
Profiles constructed of flexible, marine-grade PVC
Will not chip/crack from extreme temperatures
Resist damage from water, oil, salt, UV rays
Heavy-duty profile has full backing
Sold in a 16 roll
Galvanized Dock Cleat
Heavy galvanized, coated iron, open-base cleats
Ideal for use on piers and docks
Dockmate Aluminum "S" Dock Cleat
Sand-blasted to a clean, gray, matte finish
Designed with extra-wide footprint
Through-bolted or lag-bolted
13" long
Dockmate Stainless Steel Dock Ladders
316 stainless steel ladder
Wraparound PVC treads
16" wide
1-1/2" dia. thick walled stainless tubing
Results 1 - 34 of 34